Cellular Transport Study Guide Key

Methods of Cell Transport How do substances get into and out of a cell? How does the cell control the movement of molecules into and out of the cell?

  1. Cell Transport Study Guide Answer Key

Substances move into and out of cells by several methods. One method of movement is diffusion. Diffusion of drop of dye in pure water. Diffusion is the net movement of a substance (liquid or gas) from an area of high concentration of the substance to one of lower concentration of that substance.

Cell Transport Study Guide Answer Key

Imagine that you are in a very small room. An beautiful young lady walks in wearing very strong perfume. At first you just get a whiff as she passes near to you, but the fragrance gets stronger and stronger as the minutes go. After a couple of minutes you start sneezing uncontrollably because, as luck would have it, you are allergic to that perfume. This is an example of diffusion in action.

The concentration of perfume on the lady is very high. But since the molecules of all substances, solid, liquid or gas, are always moving rapidly, some of the perfume molecules bounce into each other and then out into the surrounding air. You have probably experienced this in class when someone arrives freshly doused in perfume or cologne. The molecules of every substance (solid, liquid, or gas) are in motion, so energy is available to move molecules, just as in the case of the water discussed above. The majority of the molecules move from higher to lower concentration, although there will be some that move from low to high. The overall (or net) movement is thus from high to low concentration.

Eventually, if no energy is put into the system, the molecules will reach a state of equilibrium where they will be distributed equally throughout the system. The Cell Membrane A cell cannot survive if it is totally isolated from its environment.

The cell membrane is a complex barrier that separates the cell from its external environment, but allows some materials to pass through. This 'selectively permeable' membrane regulates what enters and leaves the cell. All cells, in all types of organisms, are surrounded by a cell membrane. The cell membrane is a thin layer of lipid and protein that separates the cell's contents from the world around it. The cell membrane functions like a gate, controlling what enters and leaves the cell. The cell membrane controls the ease with which substances pass into and out of the cell-some substances easily cross the membrane, while others cannot cross at all.

For this reason, the cell membrane is said to be selectively permeable. Model of a cell membrane Cells and Diffusion Water, carbon dioxide, and oxygen are among the few simple molecules that can cross the cell membrane by diffusion. Water moves through membranes by a type of diffusion known as osmosis.

Diffusion is one principle method of movement of substances within cells, as well as the method for essential small molecules to cross the cell membrane. Gas exchange in gills and lungs operates by this process. Carbon dioxide is produced by all cells as a result of cellular metabolic processes. Since the source is inside the cell, the concentration gradient is constantly being replenished/re-elevated, thus the net flow of CO 2 is out of the cell. Metabolic processes in animals and plants usually require oxygen, which is in greater concentration inside the cell, thus the net flow of oxygen is into the cell. Osmosis is the diffusion of water across a semi-permeable (or differentially permeable or selectively permeable) membrane. The plasma membrane surrounding cells is such a membrane.

Guide

(Other examples are dialysis tubing and cellulose acetate sausage casing.). The presence of a solute decreases the water potential of a substance. Thus there is more water per unit of volume in a glass of fresh-water than there is in an equivalent volume of sea-water. In a cell that is submerged in fresh water, the water flow is generally into the cell since the cytoplasm contains dissolved substances as well as many organelles.

Hypertonic solutions are those in which more solute (and hence lower water potential) is present. Hypotonic solutions are those with less solute (again read as higher water potential). Isotonic solutions have equal (iso-) concentrations of substances.

Water potentials are thus equal; although there will still be equal amounts of water movement in and out of the cell, the net flow is zero. Cells placed in distilled water (hypotonic solution) take on water, swell and burst. In a salt solution (hypertonic solution), cells lose water and shrink. Active and Passive Transport Two additional methods by which substances may move through cell membranes include: Passive transport requires no energy from the cell. Examples include the diffusion of oxygen and carbon dioxide, osmosis of water, and facilitated diffusion. Active transport requires the cell to spend energy, usually in the form of ATP.

Examples include transport of large molecules (non-lipid soluble) and the sodium-potassium pump. Vesicle-mediated transport Vesicles and vacuoles that fuse with the cell membrane may be utilized to release or transport chemicals out of the cell or to allow them to enter a cell. Exocytosis is the term applied when transport is out of the cell. Note the vesicle on the left, and how it fuses with the cell membrane on the right, expelling the vesicle's contents to the outside of the cell. Endocytosis is the case when a molecule causes the cell membrane to bulge inward, forming a vesicle.

Phagocytosis is the type of endocytosis where an entire cell is engulfed. Pinocytosis is when the external fluid is engulfed. Receptor-mediated endocytosis occurs when the material to be transported binds to certain specific molecules in the membrane. Examples include the transport of insulin and cholesterol into animal cells.

Endocytosis and exocytosis.

Cell Transport Study Guide Key Chapter 7 Section 3 What two Factors can affect the rate of diffusion? Temperature Pressure What are the three types of proteins found in the cell membrane?

Markers Receptors Transport Channels Name and define the 3 types of passive transport. Diffusion The movement of particles through a membrane from an area of high concentration to an area of low concentration Osmosis The movement of water through a membrane from an area of high concentration to an area of low concentration Facilitated diffusion The movement of particles through a protein channel from an area of high concentration to an area of low concentration Name and define the 3 types of active transport.

Protein channel When molecules move through a protein channel from an area of low concentration to an area of high concentration Endocytosis When the cell membrane uses vesicles to bring solids and liquids INTO the cell Exocytosis When the cell membrane uses vesicles to bring wastes OUT of the cell Fill in the blanks. Passive transport is the movement of molecules from an area of high concentration to an area of low concentration. Active transport needs ATP (energy) in order to function because molecules move from an area of low concentration to an area of high concentration. Give an example for the following terms: Diffusion – sugar melting in coffee, food coloring dispersing in water Osmosis – plant cells absorbing water into their central vacuoles Active Transport (protein type) – Sodium Potassium Pump Facilitated Diffusion – sugar molecule going through a protein channel from high to low concentration Name and define the two types of endocytosis.

Phagocytosis Particle or solid ingestion through vesicles (similar to eating) Pinocytosis Liquid ingestion through vesicles (similar to drinking) Fill in the table below Hypertonic Isotonic Hypotonic Definition Hypertonic Isotonic Hypotonic Definition Higher concentration of solute in a solution Equal concentration of solute in solution Lower concentration of solute in solution Example Salt water Saline Distilled water What happens to cell Shrink Remain same size Swell – may burst! What are the 4 steps of the Na/k pump & what is necessary for this process?

Step 1: 3 Na+ ions bind to carrier protein Step 2: ATP binds to carrier protein and changes shape allowing Na+ to move out of the cell Step 3: 2 K+ ions move into carrier protein Step 4: ATP binds to carrier protein and changes shape allowing K+ to move into the cell ATP is necessary for this process to occur. Why would doctors inject saline solution into your veins instead of just water if you were dehydrated? Doctors inject saline solution into your veins instead of just water because saline solution is isotonic and will not change the size of the cells. If pure water was injected into your veins, your blood cells would be surrounded by a hypotonic solution and would swell and possibly burst.

Posted on