2007 Fiat Panda Owners Manual
30 SAFETY DEVICES CORRECT USE OF THE CAR WARNING LIGHTS AND MESSAGES IN AN EMERGENCY CAR MAINTENANCE TECHNICAL SPECIFICATIONS INDEX DASHBOARD AND CONTROLS Average speed This value shows the car average speed as a function of the overall time elapsed since the start of the new mission. Trip time This value shows the time elapsed since the start of the new mission. IMPORTANT Lacking information, Trip computer values are displayed with “-”. When normal operating condition is re- set, calculation of different units will restart regularly.
Fiat Panda 4x4 For Sale
Values displayed before the failure will not be reset.TRIP button fig. 30 Button TRIP, set on the top of the right steering column stalk, shall be used (with ignition key at MAR) to display and to re- set the previously described values to start a new mission: – short push to display the different val- ues – long push to reset and then start a new mission. New mission New mission starts after: – “manual” resetting by the user, by press- ing the relevant button; – “automatic” resetting, when the “Trip dis- tance” reaches 3999.9 km or 9999.9 km (according to the type of display) or when the “Trip time” reaches 99.59 (99 hours and 59 minutes); – after disconnecting/reconnecting the battery. Values displayed Range to empty (where provided) This value shows the distance in km (or mi) that the car can still cover before needing fuel, assuming that driving condi- tions are kept unvaried. The display will show “-” in the following cases: – value lower than 50 km (or 30 mi) – car left parked with engine running for long.
Trip distance This value shows the distance covered from the start of the new mission. Average consumption (where provided) This value shows the average consump- tion from the start of the new mission. Instant consumption (where provided) This value shows instant fuel consumption (this value is updated second by second). If parking the car with engine on, the display will show “-”. 001-031 Panda New GB 13:47 Pagina 30. 31 SAFETY DEVICES CORRECT USE OF THE CAR WARNING LIGHTS AND MESSAGES IN AN EMERGENCY CAR MAINTENANCE TECHNICAL SPECIFICATIONS INDEX DASHBOARD AND CONTROLS Start of journey procedure With ignition key at MAR, press and keep button TRIPpressed for over 2 seconds to reset. Exit Trip To quit the Trip function: keep button MODEpressed for over 2 seconds.
IMPORTANT The reset operation in the presence of the screens concerning the “General Trip” makes it possible to reset also the “Trip B”. The reset operation in the presence of the screens concerning only the “Trip B” makes it possible to re- set only the information associated with this function. TRIP F0G0149mfig.
Manual Fiat Panda
30 Reset TRIP B End of partial mission Start of new partial mission End of partial mission Start of new partial mission Reset TRIP B End of partial mission Start of new partial mission Reset GENERAL TRIP End of complete mission Start of new missionReset GENERAL TRIP End of complete mission Start of new mission End of partial mission Start of new partial mission Reset TRIP B Reset TRIP B TRIP B TRIP B TRIP B GENERAL TRIP˙ ˙ ˙ ˙˙ ˙ ˙ ˙ fig. 31 001-031 Panda New GB 13:47 Pagina 31. 32 SAFETY DEVICES CORRECT USE OF THE CAR WARNING LIGHTS AND MESSAGES IN AN EMERGENCY CAR MAINTENANCE TECHNICAL SPECIFICATIONS INDEX DASHBOARD AND CONTROLS REAR SEATS To tilt rear seats refer to paragraph “Ex- tending the boot” in this section. SEATS FRONT SEATS fig. 32F0G0029m fig. 33F0G0030m fig.
34F0G0031mMoving the seat backwards or forwards fig. 32 Lift the lever Aand push the seat forwards or backwards: in the driving position the arms should rest on the rim of the steer- ing wheel. Back rest angle adjustment fig. 33 Turn the knob B. Cushion adjustment (where provided) fig.
34 Use lever Dto raise or lower the back of the cushion in order to obtain the re- quired comfortable driving position. Only make adjustments when the car is stationary.
WARNING Once you have released the lever, check that the seat is firmly locked in the runners by trying to move it back and forth. Failure to lock the seat in place could result in the seat moving suddenly and the dri- ver losing control of the car. WARNING Upholstery of your car has been designed to withstand wear deriving from common use of the car.
You are how- ever recommended to avoid strong and/or continuous scratching with clothing accessories such as metallic buckles, studs, Velcro fastenings and the like, since these items cause cir- cumscribed stress of the cover fabric that could lead to yarn breaking, and damage the cover as a consequence. 032-059 Panda New GB 13:48 Pagina 32. 33 SAFETY DEVICES CORRECT USE OF THE CAR WARNING LIGHTS AND MESSAGES IIN AN EMERGENCY CAR MAINTENANCE TECHNICAL SPECIFICATIONS INDEX DASHBOARD AND CONTROLS HEAD RESTRAINTS FRONT fig. 37 According to versions front head re- straints can be fixed or adjustable in height (where provided); to adjust head re- straints proceed as follows. ❒ To raise: raise the head restraint until hearing the locking click. ❒ To lower: press button Aand lower the head restraint.
37F0G0033m Remember that the head re- straints should be adjusted to support the back of your head and not your neck. Only in this position do they exert their protective action. WARNING To optimise head restraint protective action, adjust the seat back upright and keep your head as close as possible to the head re- straint. WARNING Any adjustment of the head restraints must be carried out only with the car stationary and the engine turned off. WARNING 032-059 Panda New GB 13:48 Pagina 33. 34 SAFETY DEVICES CORRECT USE OF THE CAR WARNING LIGHTS AND MESSAGES IN AN EMERGENCY CAR MAINTENANCE TECHNICAL SPECIFICATIONS INDEX DASHBOARD AND CONTROLS REAR fig.
38 According to versions rear head restraints can be fixed (for 5-seat versions) or ad- justable. To use adjustable head restraints, raise the head restraint from position 2 “position of non use” to position 1 “com- pletely removed”. To bring it back to the original position “position of non use”, press buttonBand push the head restraint down. To take them out, press both buttons B and C, raise them and then remove.
38F0G0034m The particular head restraint shape vol- untarily interferes with the passenger’s back leaning on the rear seat in order to force him/her to lift the head restraint and use it correctly.IMPORTANT Rear seat passengers shall always set the head restraints in the “com- pletely removed” position. 032-059 Panda New GB 13:48 Pagina 34. 35 SAFETY DEVICES CORRECT USE OF THE CAR WARNING LIGHTS AND MESSAGES IIN AN EMERGENCY CAR MAINTENANCE TECHNICAL SPECIFICATIONS INDEX DASHBOARD AND CONTROLS REARVIEW MIRRORS DRIVING MIRROR fig. 40 The mirror is fitted with a safety device that causes it to be released in the event of a violent crash.
It can be moved using the lever Ato two different positions: normal or antiglare. STEERING WHEEL The steering wheel can be adjusted in height (where provided). Release the lever A-fig. 39pulling it to- wards the steering wheel, then adjust it in the most suitable position and lock it push- ing the lever Afully forwards. 39F0G0061m Any adjustment must be car- ried out only with the car stationary and the engine turned off. WARNING 032-059 Panda New GB 13:48 Pagina 35.
36 SAFETY DEVICES CORRECT USE OF THE CAR WARNING LIGHTS AND MESSAGES IN AN EMERGENCY CAR MAINTENANCE TECHNICAL SPECIFICATIONS INDEX DASHBOARD AND CONTROLS Electrical adjustment fig. 43 Proceed as follows: ❒ use switch Bto select the mirror re- quired; ❒ to adjust the mirror move the joystick Ain the four directions. 43F0G0039m As door mirrors are curved, they may slightly alter the perception of distance. WARNING On Actual versions, the door mirror shall be adjusted from the outside; to adjust it directly press slightly the four corners of the mirror. 41F0G0197m fig. 42F0G0040m When driving the mirrors shall always be in position 1. 40F0G0036m DOOR MIRRORS Manual adjustment fig.
41-42 Use lever Ato adjust mirror Bfrom the passenger compartment. When required (for example when the mirror causes difficulty in narrow spaces) it is possible to fold the mirror moving it from position 1(open) to position 2 (closed). 032-059 Panda New GB 13:48 Pagina 36. 37 SAFETY DEVICES CORRECT USE OF THE CAR WARNING LIGHTS AND MESSAGES IIN AN EMERGENCY CAR MAINTENANCE TECHNICAL SPECIFICATIONS INDEX DASHBOARD AND CONTROLS HEATING AND VENTILATION 1.Vent for defrosting or demisting wind- screen - 2.Centre adjustable and swivel vent - 3.Side adjustable and swivel vent - 4.Fixed side vent to convey air to side windows - 5.Side vents to convey air to front seat passengers’ feet - 6. Side vents to convey air to rear seat passengers’ feet. SIDE AND CENTRE ADJUSTABLE VENTS fig.
44/a - 44/b AFixed vent for side windows. BSide adjustable vents. CCentre adjustable vents. To use vents Aand Bpress them as shown by the arrow and turn them as re- quired (they can be rotated to whatever direction). 44F0G0685m fig.
44/b C I TY F0G0024m 032-059 Panda New GB 13:48 Pagina 37. 38 SAFETY DEVICES CORRECT USE OF THE CAR WARNING LIGHTS AND MESSAGES IN AN EMERGENCY CAR MAINTENANCE TECHNICAL SPECIFICATIONS INDEX DASHBOARD AND CONTROLS not to use it for long periods, especially if there several people in the car.
IMPORTANT The inside air recirculation system makes it possible to reach the re- quired “heating” or “cooling” conditions faster. Do not use the air recirculation function on rainy/cold days as it could con- siderably increase the possibility of the windows misting inside. Air distribution knob D ¥to convey air to the centre and side vents; μto warm the feet and convey cooler air to the dashboard vents; wto heat with outside harsh tempera- ture: close central and side vents to convey as much air as possible to the feet; ≤to warm the feet and at the same time demist the windscreen; -for quick windscreen demisting.VENTILATION To ventilate the passenger’s compartment properly proceed as follows: ❒central and side vents: completely open; ❒knob Aturned to blue section; ❒knob Cturned to U; ❒knob Dturned to ¥; ❒ knob Bturned to the required speed. HEATING Proceed as follows: ❒knob Aturned to red section; ❒knob Dturned to the required symbol; ❒knob Bturned to the required speed. CONTROLS fig. 45 Air temperature knob A (mixing hot and cold air) Red section = hot air Blue section = cold air Fan activation /speed adjustment knob B 0= fan off 1-2-3 = fan speed -= fan top speed Air recirculation on/off knob C U= outside air intake T= inside air recirculation This function is particularly useful when the outside air is heavily polluted (in a traf- fic jam, tunnel etc.). However, it is better fig.
45F0G0022m 032-059 Panda New GB 13:48 Pagina 38. 39 SAFETY DEVICES CORRECT USE OF THE CAR WARNING LIGHTS AND MESSAGES IIN AN EMERGENCY CAR MAINTENANCE TECHNICAL SPECIFICATIONS INDEX DASHBOARD AND CONTROLS FAST HEATING For fast heating of the passenger com- partment, proceed as follows: ❒knob Aturned to red section; ❒knob Cturned to T; ❒ knob Dturned to -; ❒ knob Bturned to -(top fan speed). Then use the controls to keep the re- quired comfort conditions and turn knob Cto U.
IMPORTANT With cold engine, you have to wait for a few minutes to let the sys- tem fluid reach the operating temperature.FRONT WINDOW FAST DEMISTING AND/OR DEFROSTING Proceed as follows: ❒knob Aturned to red section; ❒knob Cturned to U; ❒knob Dturned to -; ❒ knob Bturned to -(top fan speed). After demisting/defrosting, operate the controls to keep the required comfort. 032-059 Panda New GB 13:48 Pagina 39.
Fiat 500 Owners Manual 2012
Ask a question about the Fiat Panda (2007) Have a question about the Fiat Panda (2007) but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Fiat Panda (2007). Please make sure that you describe your difficulty with the Fiat Panda (2007) as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.